Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFull System Cleaning in Queens, NY
Residential duct cleaning in Queens typically costs between $450 and $850 for a standard single-family home, depending on square footage, the number of vents and returns, and how long it’s been since the ducts were last touched. Most jobs are completed in a single day, usually 4 to 7 hours. At Linden Air Duct Queens, you’ll get a written price before any work begins, and the technician’s name and photo will be on your phone before they ring the bell.
Full system cleaning means we clean every part of your forced-air HVAC system, not just the visible vent covers. That includes the supply ducts, return ducts, the main trunk lines, the blower motor compartment, the evaporator coil (if accessible), and both the supply and return plenums. It’s the difference between wiping down a countertop and cleaning the entire kitchen. If you’re looking for a broader overview of what this service entails, start with our Air Duct Cleaning page, which explains the full scope of ductwork services we provide throughout the borough.
We’ve been doing this work in Queens since 2004, and we’ve seen what full system cleaning looks like when it’s done halfway. That’s not how we operate. Every job is backed by our 365-Day Done Right Promise in writing, so if something isn’t right, we make it right. You can reach us any time at (845) 237-0925 for a free estimate.
Homeowners in Queens call us most often when they’ve noticed dust settling back on furniture within days of cleaning, when allergy symptoms flare at home but not away from it, or when they’ve just moved into a house where the previous owners had pets or smoked indoors. Full system cleaning addresses the root of those problems, not just the surface.
When You Need Full System Cleaning
Not every home needs this level of service every year. But if you recognize your situation in any of the items below, a full system cleaning is the right call:
- Dust returns within days of wiping surfaces. In neighborhoods like Forest Hills and Kew Gardens, where many homes still run original ductwork from the 1940s and 1950s, accumulated debris in the trunk lines just keeps recirculating no matter how often you dust.
- Allergy or asthma symptoms improve when you leave home. Pet dander, pollen, and dust mites settle in ductwork and get pushed through every room whenever the heat or AC kicks on.
- Visible dust or debris blowing from vents when the system starts. If you see puffs of dust from a supply register in Astoria or Sunnyside, the ducts behind it are loaded.
- Renovation or construction dust. Queens homes that have had kitchen remodels, bathroom gut renovations, or plaster work done will have fine construction dust throughout the duct system. Standard filter changes won’t touch it.
- New home purchase with unknown duct history. If you bought a house in Bayside or Flushing and have no records of when the ducts were last cleaned, assume they haven’t been. Sellers rarely clean ducts before closing.
- Musty or stale odor from the vents. Moisture in Queens basements, especially in low-lying areas like Howard Beach or the Rockaways, can create conditions where mold and mildew grow in return ducts and get distributed throughout the house.
Our Full System Cleaning Process
Here’s exactly how a full system cleaning works when you schedule with Linden Air Duct Queens:
- Pre-visit confirmation. Before the appointment, we send you the technician’s name and photo. When they arrive, they’re in a clean, marked uniform and they show a photo ID badge at the door. That’s the Threshold Standard, and it applies to every single visit.
- System inspection and written price. The technician walks through your home, checks the furnace or air handler, locates all supply and return registers, and assesses the condition of the ductwork. Then you get a written price before any work begins. No exceptions, no surprises at the end.
- Register and grille removal. We remove every vent cover in the home, clean them by hand or with professional agitation equipment, and set them aside. In older Queens homes with painted-over registers, we take care not to damage surrounding trim.
- Negative-pressure extraction. We connect a high-powered vacuum system to the main trunk line near the furnace. This creates negative pressure throughout the duct system, so anything we dislodge gets pulled out of the ducts and into the collection unit, not blown into your living room. We run professional-grade Nikro and Rotobrush equipment for this step.
- Agitation and brushing. With the vacuum running, we send rotating brushes and air whips through every supply and return run to dislodge caked-on dust, pet hair, and debris from the duct walls. This includes branch lines to every room, not just the main trunks.
- Blower compartment and coil cleaning. We clean the blower motor housing, the fan blades, and the evaporator coil if it’s accessible. A dirty coil forces your AC to work harder in Queens summers, and cleaning it improves airflow and efficiency. In homes with Aprilaire or Honeywell media cabinets, we inspect and note the filter condition so you know when to replace it.
When we’re finished, we walk you through what we found and what we did. You’ll know exactly what came out of your ducts and what condition the system is in going forward.
Full System Cleaning Pricing in Queens
Here’s what you can expect to pay for full system cleaning in Queens, based on what we’ve charged across the borough over the past several years:
| Home Size | Typical Duct Count | Price Range |
|---|---|---|
| Condo / co-op apartment | 6-10 vents | $350 – $500 |
| Small single-family home | 10-14 vents | $450 – $650 |
| Average single-family home | 14-18 vents | $550 – $750 |
| Large single-family home | 18-24 vents | $650 – $850 |
| Very large home / multi-zone | 24+ vents | $800 – $1,100+ |
What actually moves the price within these ranges:
- Number of vents and returns. More registers means more access points and more time on the job. A three-bedroom colonial in Douglaston with 20 vents will cost more than a one-bedroom co-op in Jackson Heights with 8.
- Access to the furnace and coil. Basement furnaces are easy. Attic installations, especially in older Queens capes and split-levels, take longer and require more care navigating tight spaces.
- Condition of the ductwork. Ducts that haven’t been cleaned in 20 years, with heavy buildup or evidence of rodents, require more aggressive agitation and additional time.
- Presence of flex duct vs. rigid metal duct. Flex duct is common in newer Queens construction and in many attic runs. It requires gentler brushing to avoid tearing, which can take longer. Rigid galvanized duct in pre-war homes can handle more aggressive cleaning.
We don’t believe in phone quotes that change when the tech walks through the door. That’s why the price is always put in writing before we start, and why estimates are free. Call (845) 237-0925 and we’ll schedule a visit when it works for you, including weekends.
If you’d like a broader sense of what duct cleaning costs across different service levels in the borough, our Air Duct Cleaning in Queens page breaks down pricing for every service tier we offer.
FAQs – Full System Cleaning
How much does full system cleaning cost in Queens?
Full system cleaning in Queens ranges from $350 for a small apartment to over $1,100 for a large multi-zone home, with most single-family houses landing between $450 and $850. The final price depends on the number of vents, the accessibility of your furnace and coil, and the condition of the ductwork. Call (845) 237-0925 for a free, no-obligation estimate in writing before any work begins.
How long does a full system cleaning take?
A full system cleaning takes between 4 and 7 hours for a typical Queens home, depending on the number of vents and the condition of the ductwork. Apartments and co-ops are usually done in 3 to 4 hours, while large homes with 20 or more vents may take the full day. We’ll give you a clear time window when you book, and the technician will confirm the scope before starting.
How often should I get full system cleaning done in Queens?
Most Queens homeowners should schedule full system cleaning every 3 to 5 years, or sooner if you’ve completed renovations, adopted pets, or noticed dust and odor issues from your vents. Homes near busy roads like Queens Boulevard or the BQE, and homes with window AC units that run all summer, tend to accumulate dust faster. If you’ve never had it done and your home is over 10 years old, the first cleaning is the most important one.
Is full system cleaning worth it compared to just cleaning the vents myself?
Full system cleaning reaches the trunk lines, return ducts, blower compartment, and coil, which are the areas where most allergens and dust actually accumulate. Cleaning just the vent covers you can see from your living room addresses maybe 5% of the problem. The equipment we use, including negative-pressure extraction systems from Nikro and professional agitation tools from Rotobrush, removes debris you can’t reach with a household vacuum. For an honest assessment of what your system actually needs, call (845) 237-0925 and we’ll tell you straight.
Do you clean dryer vents as part of full system cleaning?
Full system cleaning covers the HVAC ductwork: supply ducts, return ducts, trunk lines, the blower compartment, and the evaporator coil. Dryer vent cleaning is a separate service that addresses the dedicated exhaust line from your dryer to the outside of your home. If you need both, ask when you call, and we’ll give you a combined written price before we start.
Written by Marcus Veale, Owner at Linden Air Duct Queens, serving Queens.